Maintenance and Care Strategies for Your Smok Pen Starter Kit
The Smok Pen is a new type of pen that allows you to write in some recoverable format that is heated right before you write. It’s the sort of device that some students would like to have, as it eliminates the necessity for them to carry a complete tube of special writing ink. You simply fill the reservoir with the normal ink and place your pen in the unit and write on any smooth surface that you would like.
The Smok pen consists of two major components: the pen body, that is of course where you possess it set up, and the Smok Valve which serve because the connector for the USB charging port. Both parts are encased in a metal and plastic tube known as the Smok Valve, which is opened via a valve control found at underneath of the pen. One end of the tube leads to the cigarette lighter socket as the other results in the USB charging port. On the front side of the Smok Valve there is a dome with a lip that holds the heating element.
Once the pen is charged, it is heated up by the USB power port and begins to generate heat. This heat melts the glue which holds the Smok Valve together, causing it to expand until it leaks out onto the paper or anything you are writing on. After the ink is successfully charged, the Smok Valve automatically closes, leaving you with a completely functional pen. The surface of the pen includes a transparent dome with a lip around it. The two edges of the dome have a metallic texture to them, which when heated causes the ink to spread right into a fine powder that can easily be sucked in to the writing medium.
When you initially remove your Smok Pen, you will observe that it looks exactly like any other pen. It has a fine point that wont smudge or bleed while you are writing on paper. It also includes a beautiful metallic shine to it, which gives the device a futuristic look. However, this does not mean that the device can’t be used in a typical manner, as there are a variety of different ways where you can still enjoy the great features of the pen.
A proven way is to heat the unit using your hand, that is how a lot of people enjoy their pens. If you are using the device in this manner, you need to make sure that you do not touch the heating coil heads directly. Instead, you need to warm the entire pen to bring out their warmth. It is very important remove the battery prior to this task, as some manufacturers specify a certain temperature to activate the coil heads. There are numerous e-liquids available on the market that can help you achieve this heat change quickly and easily, ensuring that you never run into problems while warming the pen.
You may find that after heating up the device that it generally does not work correctly. This normally implies that you are either holding the pen incorrectly, are pressing the heating coil too hard, or are holding the device at a position which is not conducive to warming. If this is actually the case, then you should remove the batteries and put the device back together again. It is strongly recommended that you do this each and every time you start enjoying your Smok Pen starter kit – if you wish to keep carefully the device for longer than this then you can simply repeat the process until you have everything sorted.
When testing your starter kit to make certain everything is working correctly, you need to take a look at the connections to the tank and the coil head. Ideally, the connections on the tank should be securely tightened – if they’re loose then they should be tightened to the manufacturer’s specifications. If you feel that this is not done correctly, then it may be worthwhile having the entire tank re-tightened by way of a professional as many devices like they are manufactured to an extremely high standard. If this is not the case, then the only way to make sure that everything is working properly is to have the entire tank re-tied.
The next phase in the battery care process is to charge your show pen. This may usually be achieved through the USB port of your computer. Once charged, these devices ought to be ready for use. When you have completed this step, you need to leave the device connected to a power supply. You need to check regularly that the coils are charged up, and you should leave these devices to charge for the Novo 2 recommended time period – typically around 5 hours.